Dust Extraction & Dust Collectors
GYS Innovative Dust Extraction System
The GYSDUST EXTRACTOR is an efficient, pneumatic dust-extraction unit for sanding dust designed especially for car body repair jobs. There is no electric motor to be concerned about, this machine is fully air operated. The innovative suction system, developed by GYS, best combines high suction performance with low air consumption. The machine is uniquely quiet so that you can have a full conversation as you sand. The GYS dust extraction system permits adjustable sanding pressure and pressure gauge allowing use with all types of commercial sanders. This ATEX-certified device does not require maintenance. You will only need to change the vacuum bag from time to time when full of captured sanding dust. This high-quality dust extraction system helps you keep a clean and healthier work environment while also being priced perfectly for you. Learn about this industrial machine's standard features below.
Features
Robust
- ATEX Certified
- Suitable for steel and aluminum sanding dust from car-body repairs
Efficient
- This powerful GYS suction system achieves high suction levels with low air consumption
- Compatible with all types of commercial sanders
Easy to use
- No moving parts
- No filter to clean
- No maintenance required
- No electric motor
Practical
- Lightweight at 46 lbs.
- Compact at 2.5’ tall
- Mobile with two large 6” wheels make it easy to move around the workshop
Accessories Included
- 1 Earth Clamp
- 1 Dust Bag (PN. 058880 5 Bags) Holds 11 lbs.
- 1 Hose (Over 16”)
Optional pneumatic orbital sander

MIRKA PRO S 650HP PN. 071346
Specifications
Bag Capacity | 11 lbs. |
Air Flow | 600 l/mn |
Air Consumption | 340 l/mn |
Suction Power | 1 150 mm H20 |
Noise Level | 70 dB (A) |
Hose Dimension | 2.9 cm in diameter 16 ½ feet long |

Optional pneumatic orbital sander

MIRKA PRO S 650HP PN. 071346
Eurovac II – Wet Mix Dust Collector
Dust is drawn into the unit through and forced down through a venturi, deep into the water. The water acts as a separator, and the majority of the dust particles fall to the bottom of the unit immediately. Those particles that manage to escape this first stage of cleansing, are forced through thick curtains of water and are deflected by a series of baffles into the water turbulence, separating the remaining dust from the air. The moist clean air is drawn through the unit by an internally fitted blower, passes through a stainless steel mist eliminator, where the moisture is removed from the clean air. The dust which has settled to the bottom of the unit is removed through the sludge drain valve.
Features
- Powerful 13.8 amp motor with sealed bearings built to handle moist air from wet collector. 1560 watt pump produces 145” of water column; 140 free flow CFM.
- Quiet operation particularly for fine dust… motor housing is insulated and baffled for sound.
- On/off feature…motor is turned on and off automatically by air switches when pneumatic tools are activated. This increases the life of the motor and reduces energy costs of running the motor.
- Includes a plastic sight glass to determine when water should be added.
Stainless steel mist eliminator. - 2” ball valve & hose at the bottom of the separator for removing sludge.
