Dent-Repair Systems

AL-5 | Aluminum Dent-Pulling System

Pro Spot AL-5 Capacitor Discharge Stud Welder is designed for aluminum dent pulling and can also be used with steel studs for welding to UHSS panels with no or very little heat applied to the panels. The welder is very easy to use and is controlled by just one knob to adjust weld power. The welder auto detects the line voltage between 110 VAC - 240 VAC.

al5 pull-bar-product-large

Dent-Pull Bar

Designed for both aluminum and steel dent pulling, the Pull Bar features 4 and 6 jaw clamps and adjustable foot-swivel pads for mounting both vertically and horizontally. It can also be used together with the Pro Pull for isolated dent pulling.

aluminum-station

Aluminum Station

The Al-5 Aluminum Dent-Pulling System comes packaged with Pro Spot's Aluminum Weld Station.

AL-5 Dent puller
PRo Pull

Pro Puller Dent Puller

(Optional) Pro Pull is the latest in dent-pulling technology for the collision industry. This extraordinary tool makes dent pulling an art.

pull-bar-pro-pull-large

Dent Pulling

Simply insert the stud into the front of the weld shaft, press down, and weld. Studs will be securely fastened to the surface and will allow you to pull dents out of the panel.

Dent Pulling

Glue Tab Dent Repair Kit

This advanced 90-Pieces dent-pulling and repair system uses plastic tabs with hot glue to straighten dented and bumped areas without damaging the surroundings. Disassembling panel fixtures are no longer necessary thanks to the well-designed tabs and adjustable glue gun thermostat control unit.

Dent Repair

CamPro Dent-Pulling Videos

NP-3 | Nitrogen Plastic Welder

The Nitrogen Plastic Welder uses hot nitrogen gas to restructure common plastic components in automotive repair — from cracked bumper cover surfaces to hinged tabs. Nitrogen is used as a shielding gas to prevent the plastic from burning during the welding process — producing a strong, lasting weld. Compressed air is used to maintain consistent temperature between welds — the nitrogen is only activated when pulling the trigger so that it’s not wasted between welds.

Heater Protection

The Gas-Pressure-Sensing-System extends the heating element lifetime by detecting low air flow. Loss of supply pressure causes power to the heating element to shut down while the display screen shows a “low flow” warning.

Digital Controls

All digital controls for setting air, nitrogen flow, and temperature settings.

Plastic Welding Rods

The NP-3 kit includes various plastic welding necessities such as thermoplastic filler rod, aluminum tape, and fine grit sandpaper.

12V Adapter

Our very own HSW-200 Hot Staple Welder utilizes this handy 12V adapter, completing your plastic repair tool set.

Welding Iron

The Welding Iron provides extreme versatility. With its several tips we can tack, weld, and smooth.

Smoothing Iron

The Smoothing Iron is used to form a seamless transition between filler and base plastic.

np-3-product-large

Plastic Welding Applications

PR-2 | Multi-task Steel Dent Repair

The PR-2 Welder is a highly versatile system that allows the user to weld multiple fasteners from the OEM. The PR-2 is also able to perform many single-sided welding functions such as stitch welding, washer welding, nut and bolt welding, nail welding, molding clip rivet welding, and Pro Pull dent pulling.

Single-Sided Welding

10 different Single-Sided welding applications give you the power and versatility to complete any job.

Dent Repair / Stitch Welding

Pro Spot has a wide range of tools to help car repair professionals repair dents, gouges, tears, and remove rust.

Auto Weld Feature

Automatically senses when a pull key or weld tip make contact with metal.

Pull-Key Technology

By using weld keys, the user is able to pull a large area at once.

pr-2-product-large

Single-Sided Welding

i4-ss-gun
pr-2-weld-samples
The PR-2 is capable of handling a variety of single-sided welding needs, including: washer, nut & bolt, nail, rivet, and stitch.

Dent Repair / Stitch Welding

Auto-Weld Feature

Autoweld handle

The PR-3 Auto senses when a weld tip or pull key has made contact and welds automatically after a short delay. The Auto feature is very quick and user friendly due to the fact that it does not weld instantly like other higher-priced systems on the market. Electrodes that can be used with the Auto-Mode include:

  • Pull Key Electrode (PS-880)
  • 4mm Stud Holder Electrode (PS-820)
  • 6mm Stud Holder Electrode (PS-839)
  • Washer Adapter (PS-840)
  • Rivet Holder (PS-870)
  • Spot Hammer Assembly (CLP-70)
  • Weld-on Shaft Dent-Pulling Kit (CLP-110)
  • Weld-on Shafts (SA-0153, SA-0152, SA-0151)
Pro Spot Precision Dent-Pulling

By using weld keys, the user is able to pull a larger area all at once. They are also useful for pulling out creases. When the keys are welded in a crease and the metal rod is inserted through the group of keys, the low portion of the crease will be pulled first and the entire crease is then pulled evenly flat. Used with the Pro Pull Single Pull or Pull Bar.

Pro Pull Complete Dent-Repair System

The Pro Pull Complete utilizes the all new PR-3 Auto to generate the precise, High-Power / Low-Weld time needed to prevent damage to the corrosion protection on the backside of the panel. The PR-3 Auto senses when a weld tip or pull key have made contact and welds automatically after a short delay. The Auto feature is quick and user friendly due to the fact that it does not weld instantly like other higher-priced systems on the market. The Pro Pull Complete has all the accessories that you will need to make the repair-fast, whether large or small.

Single-Sided Welding

10 different Single-Sided welding applications give you the power and versatility to efficiently complete any job.

Dent Repair / Stitch Welding

Pro Spot has a wide range of tools to help car repair professionals repair dents, gouges, tears, and remove rust.

MIG Combi Welding (Optional)

Combine the already flexible capabilities of the PR-2 with Metal Inert Gas (MIG) welding.

Steel-Repair Station

The PR-2 is included as part of the Steel Dent Removal / Repair Station as well as the Dent Pull Bar and several other useful tools.

propullcomplete-product-large

PR-3 Auto

PR-3-Auto

The PR-3 Auto senses when a weld tip or pull key has made contact and welds automatically after a short delay.

Technical Specifications:

  • Input Power: 1 Phase 208V-230V or 400V
  • Input Amperage: 24A
  • Input Cable: 30’ (9m)
  • Output Amperage: 2,000A Max (at tips)
  • Welding Cable: 8’ (2.5m)
  • Welding Cable/T-Dent: 8’ (2.5m)
  • Dimensions: 18x14x12in.

Single-Sided Welding

i4-ss-gun
pr-2-weld-samples
The PR-2 is capable of handling a variety of single-sided welding needs, including: washer, nut & bolt, nail, rivet, and stitch.

Dent Repair / Stitch Welding

MIG Combination

PR2 MIG Welder

The PR-2 package can include a MIG welder as an option. It can also be installed later as an upgrade. This feature allows the convenience of STRSW and MIG welding in one unit.

MIG Features

  • 220V 1-phase ready to use
  • Binzel connector: quick-connect all-in-one adapter
  • Ideal for collision-repair welding

Related Products